1 FLOATING RESIDUE MANAGER INSTRUCTION MANUAL PARTS IDENTIFICATION 2565-415_REV_A – UPDATED 03/09 YETTER MA
10 MAINTENANCE Storing the Equipment Store the machine in an area away from human activity Store machine in RAISED position. Install service lock
11 TROUBLESHOOTING Problem Overall settings Cannot set shallow enough. Spoke wheels not turning continuously. Cause Planter not set cor
12 PARTS IDENTIFICATION 2967-113 - FLOATING RESIDUE MANAGER STEM Key Qty Part No. Description 1 1 2967-241 Pivot Arm W.A. 2 1
13 PARTS IDENTIFICATION 2967-113 - FLOATING RESIDUE MANAGER STEM Key Qty Part No. Description 1 1 2967-241 Pivot Arm W.A. 2 1
14 PARTS IDENTIFICATION 07-97 TO 05-08
15 PARTS IDENTIFICATION 05-08 TO PRESENT
16 PARTS IDENTIFICATION 07-97 TO 05-08
17 PARTS IDENTIFICATION 05-08 TO PRESENT
18 PARTS IDENTIFICATION 07-97 TO 05-08
19 PARTS IDENTIFICATION 05-08 TO PRESENT
2FOREWORDYou’ve just joined an exclusive but rapidly growing club. For our part, we want to welcome you to the group and thank you for buying a Yett
20 2565-415_REV_A 03/09
3 SAFETY A brief description of signal words that may be used in this manual: CAUTION: Used as a general reminder of good safety practices or to d
4 ASSEMBLY 2910/2995/2996 MOUNTING BRACKET 1. Remove 3/8 x 2-1/2" roll pin from end of 1-1/2" diameter shank and remove coulter. 2.
5 MAINTENANCE BEARING ASSEMBLY AND LUBRICATION Practice Safety Understand and practice safe service procedures before doing work. Follow ALL the
6 MAINTENANCE NOTE: Be certain to align the grease fitting with the slot in the wheel and the hubcap so that the grease can flow freely. IMPORTANT
7 MAINTENANCE Grease must fill this Hubcap cavity.
8 MAINTENANCE Lubrication CAUTION: To help prevent serious injury or death to you or others caused by unexpected movement, service machine on a level
9 MAINTENANCE Lubrication Symbols Lubricate with grease at hourly interval indicated on symbol. Lubrication Intervals IMPORTANT: The recommended s
Comments to this Manuals